Wideband 0.18µm CMOS VCO Using Active Inductor with Negative Resistance
Szczepkowski, Grzegorz and Baldwin, Gerard and Farrell, Ronan (2007) Wideband 0.18µm CMOS VCO Using Active Inductor with Negative Resistance. In: Proceedings of 2007 European Conference on Circuit Theory and Design, 26th - 30th August 2007, Sevilla, Spain.
This paper presents a wideband voltage controlled oscillator topology based on an active inductor generating negative resistance. The proposed architecture covers a frequency band between 1.325 GHz - 2.15 GHz with average in-band phase noise of -86 dBc/Hz at 1 MHz offset from the carrier frequency. Power consumption of the oscillator core is 28 mW from a 1.8 V supply. The circuit has been simulated in Eldo RF (Design Architect IC, Mentor Graphics) using UMC 0.18 µm 1P6M Salicide RF CMOS model libraries.
|Additional Information:||Copyright Notice "©2007 IEEE. Reprinted from Proceedings of 2007 European Conference on Circuit Theory and Design Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE." http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=4529765&isnumber=4529518|
|Keywords:||CMOS integrated circuits; Circuit simulation; Inductors; Voltage-controlled oscillators; CMOS VCO; Eldo RF; UMC 1P6M Salicide RF CMOS model libraries; Active inductor; Frequency 1.325 GHz to 2.15 GHz; In-band phase noise; Negative resistance; Size 0.18 mum; Wideband voltage controlled oscillator topology. |
|Subjects:||Science & Engineering > Electronic Engineering|
|Deposited By:||Dr. Ronan Farrell|
|Deposited On:||25 May 2009 16:16|
Repository Staff Only: item control page